English
 |
| Quantity: | |
|---|---|
Scope of application:
Salt spray test machine is used to test the corrosion resistance of various materials after surface treatment, including coating, electroplating, organic and inorganic film, anodizing, anti-rust oil and other anti-corrosion treatment, so as to establish the quality of the product.
Model and name: Salt spray test box
I. Salt spray test chamber specifications
Internal dimensions 250×250×200 (L×W×H)mm
External dimensions 500×350×400(L×W×H)mm
Test chamber temperature NSS ACSS 35oC±1 oC Copper acceleration: 50 oC±1 oC (thickened type available)
Pressure barrel temperature NSS ACSS 47 oC±1 oC Copper acceleration: 63 oC±1 oC (thickened type available)
Test chamber volume 13L Salt water tank volume 5L
Compressed air pressure 1.00±0.01kgf/cm2 Spray volume 1.0-2.0ml/80cm2.h
Relative humidity in the test chamber above 85%
ant or bright coatings, or parts that are easy to stick, it is advisable to make the drum speed higher. For example: 7 rpm is suitable for zinc plating, 11 or 15 rpm is suitable for copper plating, nickel plating, and tin plating, and 15 or 25 rpm is suitable for decorative gold plating and silver plating.
Scope of application:
Salt spray test machine is used to test the corrosion resistance of various materials after surface treatment, including coating, electroplating, organic and inorganic film, anodizing, anti-rust oil and other anti-corrosion treatment, so as to establish the quality of the product.
Model and name: Salt spray test box
I. Salt spray test chamber specifications
Internal dimensions 250×250×200 (L×W×H)mm
External dimensions 500×350×400(L×W×H)mm
Test chamber temperature NSS ACSS 35oC±1 oC Copper acceleration: 50 oC±1 oC (thickened type available)
Pressure barrel temperature NSS ACSS 47 oC±1 oC Copper acceleration: 63 oC±1 oC (thickened type available)
Test chamber volume 13L Salt water tank volume 5L
Compressed air pressure 1.00±0.01kgf/cm2 Spray volume 1.0-2.0ml/80cm2.h
Relative humidity in the test chamber above 85%
ant or bright coatings, or parts that are easy to stick, it is advisable to make the drum speed higher. For example: 7 rpm is suitable for zinc plating, 11 or 15 rpm is suitable for copper plating, nickel plating, and tin plating, and 15 or 25 rpm is suitable for decorative gold plating and silver plating.